Step by step intructions for the removal of a Volkswagen Beetle body from the pan from Superbeetles.com

A documented account of overall body and prep work before paint. Several pictures in each stage help demonstrate the process.

Most VW bumpers simply bolt on and bolt off.  This section will be particularly helpful in avoiding complications in this process, and resolving problems should they occur.

A documented account of restoring a convertible top.  Numerous pictures included at each step to illustrate the process.

Replace a broken lock or handle mechanism. Also a common job when keyholes become worn out or weather damaged.

Another time consuming job that tries one's patience.  Since these mechanisms  are susceptible to wear and tear, this is often times a necessary step in the restoration process.

An essential step in having a properly working door.  A well adjusted striker plate means the door will close virtually effortlessly and latch with a definitive clicking sound.

Removal of door panels is an essential step for gaining access to the internal workings of both the window and door latch mechanism.

Door installation is a tricky job.  Although the removal of the doors can be done alone, it is recommended you use an assistant for the re-installation portion.  Note: pressurized...

Door window installation is a highly detailed job which will require a lot of patience and a considerable amount of time.  This section includes instructions for Window Regulator...

Fender removal and installation is a fairly straightforward task.  This will guide you through the process to complete it quickly and easily.

A complete floor pan removal procedure with several pictures to illustrate.

A difficult task that once again will require some welding.  It is often times recommended that both front fenders and the gas tank be removed for easy access and proper alignment.

Step by step documentation of the rear apron removal and installation.  A number of pictures are incorporated here to illustrate the process.

Rear apron removal and installation can be a very long and tedious process which requires some welding.  It is recommended that the engine be removed prior to new installation to provide...

The running board is a nice detail and adds a nice finishing touch to any bug. Note: special care must be taken to ensure bolts along the car body do not break during removal

The text following is part of a series of articles written by John S. Henry on the restoration and maintenance of air-cooled Volkswagens. While his experience is exclusively with the Beetle,...

Window installation certainly requires a steady hand and a lot of finesse.  Care must be taken to ensure a watertight seal is created between the body and the glass.